La Pajarita

Tray decoration with La Pajarita Finish Glass Varnish (II)

0 comments
66915viewed
Compartir en Google + Compartir en Linkedin

LIST OF NEEDED MATERIALS FOR FINISH GLASS TRAY DECORATION:

  • La Pajarita Finish Glass Varnish
  • Tray (decorated previously in our Tray Preparation (I) for Finsh Glass Varnish post)
  • Measuring bowl
  • Flat palette knife
  • Paintbrush
  • Card or similar object

 

STEP BY STEP FOR FINISH GLASS TRAY DECORATION:

1. Measure and add 2 parts resin or Component A to 1 part hardener or Component B in a measuring bowl. If a more diluted mixture is required, add between 5% and 15% of “Finish Glass thinner”

 

2. Mix the two components, stirring well for at least 2 minutes with a flat palette knife. The container must have a flat base and flat sides to ensure an even mixture.

 

3. Pour evenly onto the surface to be varnished, ensuring that there are no dry areas. The left over mixture will start to thicken within 20 minutes and cannot be used again. If there are bubbles in the mixture, they will disappear.

 

4. Due to the slow drying of the varnished object, it is convenient to cover it over to prevent dust and dirt from settling on the surface.

 

5. Drying time varies depending on room temperature and the thickness of the applied mixture. A temperature between 21 – 25 degrees Celsius is recommended. Drying time for complete hardening is 72 hours.

 

Tip:

To go to the previous step, follow the link TRAY PREPARATION FOR FINISH GLASS VARNISH (I)

Leave a comment

Carlos Grollo, S.A.
Tel.: + 34 96 154 51 66 - Fax: + 34 96 154 52 15 - Email: info@lapajarita.es

Aviso Legal